tin tức công ty về Comprehensive FAQ – BQ, NQ, HQ, PQ Carbon Steel Wireline Drill Rods

Q1: What do the letters BQ, NQ, HQ, and PQ stand for?

A: They are standard wireline core barrel sizes defined by the Diamond Core Drill Manufacturers Association (DCDMA). They denote the diameter of the core recovered:

• BQ: ~36.5 mm hole diameter, recovers ~26.7 mm core.

• NQ: ~75.7 mm hole diameter, recovers ~47.6 mm core (most common).

• HQ: ~96 mm hole diameter, recovers ~63.5 mm core.

• PQ: ~122.2 mm hole diameter, recovers ~85 mm core.

Q2: Can I use these rods for Horizontal Directional Drilling (HDD)?

A: Yes. While designed for vertical wireline coring, these carbon steel rods have excellent straightness and strength, making them suitable for directional drill rod applications, including HDD and pilot hole drilling.

Q3: What makes the "special geological steel pipe" different from regular pipe?

A: Regular pipe lacks the specific heat treatment and alloy composition required for deep drilling. Special geological steel pipe offers higher yield strength, better impact toughness at low temperatures, and superior fatigue resistance under cyclic bending loads.

Q4: How are the threads tested?

A: Each thread is inspected using a special thread gauge (both GO and NO-GO gauges). This ensures that every male and female connection meets precise tolerances for a solid, leak-free, and mechanically strong joint.

Q5: Do these rods have a self-cleaning feature?

A: Yes. The combination of the polished finish and optimized thread geometry allows drilling fluid to flush cuttings away from the connection area, reducing the risk of the rods becoming stuck or cross-threaded.

Q6: Are these rods compatible with other brands' BQ/NQ/HQ/PQ equipment?

A: Yes, provided the other equipment also adheres to DCDMA international standards. Because these rods are tested with standard thread gauges, they should mate correctly with industry-standard adapters, core barrels, and drill heads.

Q7: What is the polishing finish for?

A: The special polishing finish reduces surface friction, improves corrosion resistance, and enhances the self-cleaning effect. It also makes visual inspection for cracks easier.

Q8: What is your typical lead time?

A: (Answer will vary – please contact us for current production schedule. As a leading manufacturer since 2008 in Wuxi City, we maintain stock on common sizes like NQ and HQ.)

Q9: Can you customize lengths?

A: Standard lengths are typically 1.0m, 1.5m, 2.0m, and 3.0m. For special project requirements, please contact our engineers.

Q10: How should I store my rods to prevent rust?

A: Store indoors on wooden racks, slightly angled for drainage. Apply a light coat of rust preventative oil to threads and polished surfaces if storing for over 30 days.